Victron MultiPlus PMP243021102 Inverter/Charger 24V/3000 VA

$0.00 - 0 items Categories

Categories

<< Store Home Page...

Victron MultiPlus PMP243021102 Inverter/Charger 24V/3000 VA

  • PowerAssist allows the inverter to assist the grid/generator source when ac input limits are exceeded.
  • Capable of remote monitoring via Cerbo Gx.
  • Up to six Multis can operate in parallel to achieve higher power output.
  • 120 VAC (Three phases or split phase operation is also possible via stacking capabilities).
  • 3000 watts of power.
  • 3000 Watt units are equipped with dual output with the second output only live when ac input is applied. (perfect for a load that should not draw the battery down such as a dehumidifier).
  • Up to 120-Amp charger.
  • Pure Sine Wave 120 volt 60 Hz AC output.
  • Continuous output power: 3000 watts.
  • 50 Amp transfer switch.
  • 4 stage 80 Amp charger for the main battery.
  • 4 Amp charger for start battery.
  • Battery temperature sensor included.
  • PowerAssist allows the inverter to assist the grid/generator source when ac input limits are exceeded.
  • Capable of remote monitoring via Cerbo Gx.
  • Up to six Multis can operate in parallel to achieve higher power output.
  • 120 VAC (Three phases or split phase operation is also possible via stacking capabilities).
  • 24 VDC input.
  • Optional remote panel available.
  • Dimensions (H x W x D): 14.3″ x 10.2″ x 8.6″ inches.
  • Weight: 40 Lbs.
  • Warranty: 5 Years Limited Warranty.

Wholesale Only Become A Dealer

SKU: PMP243021102

The MultiPlus is a compact enclosure that houses a powerful true sine wave inverter, a sophisticated battery charger with adaptive charge technology, and a high-speed AC transfer switch. Victron MultiPlus PMP243021102 has two AC outputs, one of which is a no-break output.

In the event of a grid failure or when shore-/generator power is disconnected, the MultiPlus takes over the supply to the connected loads. This happens so quickly (less than 20 milliseconds) that computers and other electronic devices continue to function normally. The second output is active only when AC is connected to the MultiPlus’s input. This output can be used to connect loads that should not discharge the battery, such as a water heater (second output available on models rated at 3kVA and more).

To increase power output, up to six Multis can operate in parallel. Six 24/3000/70 units, for example, provide 15kW / 18kVA output power and 420 Amps of charging capacity. Three units can be configured for three-phase output in addition to parallel connection. But that’s not all: three strings of six parallel units can be used to build a 45 kW / 54 kVA three-phase inverter and a 1260 A charger.

Victron Energy MultiPlus PMP243021102 Inverter/Chargers also have split-phase options. Two units can be stacked to provide 120-0-120 V, and up to six units per phase can be paralleled to provide up to 30 kW / 36 kVA of split phase power. Alternatively, by connecting our autotransformer, we can obtain a split-phase AC source.

Features: Victron Energy MultiPlus PMP243021102 Inverter/Charger

  • PowerAssist allows the inverter to assist the grid/generator source when ac input limits are exceeded.
  • Capable of remote monitoring via Cerbo Gx.
  • Up to six Multis can operate in parallel to achieve higher power output.
  • 120 VAC (Three phases or split phase operation is also possible via stacking capabilities).
  • 3000 watts of power.
  • 3000 Watt units are equipped with dual output with the second output only live when ac input is applied. (perfect for a load that should not draw the battery down such as a dehumidifier).
  • Up to 120-Amp charger.
  • Pure Sine Wave 120 volt 60 Hz AC output.
  • Continuous output power: 3000 watts.
  • 50 Amp transfer switch.
  • 4 stage 80 Amp charger for the main battery.
  • 4 Amp charger for start battery.
  • Battery temperature sensor included.
  • PowerAssist allows the inverter to assist the grid/generator source when ac input limits are exceeded.
  • Capable of remote monitoring via Cerbo Gx.
  • Up to six Multis can operate in parallel to achieve higher power output.
  • 120 VAC (Three phases or split phase operation is also possible via stacking capabilities).
  • 24 VDC input.
  • Optional remote panel available.
  • Dimensions (H x W x D): 14.3″ x 10.2″ x 8.6″ inches.
  • Weight: 40 Lbs.
  • Warranty: 5 Years Limited Warranty.

Documents: Victron Energy MultiPlus PMP243021102 Inverter/Charger

Videos: Victron Energy MultiPlus PMP243021102 Inverter/Charger

VE Configure 3 basic | Victron Energy

VE Configure 3 basic | Victron Energy

This is an instructional video showing the basics of VEConfigure 3.

VEConfigure is a free software program which allows you to program and update settings in VE.Bus products such as Phoenix Inverters, Chargers, Multis and Quattros.

FAQs: Victron Energy MultiPlus PMP243021102 Inverter/Charger

☁️ How many years of warranty does Victron Energy provide for MultiPlus Inverter/Chargers?

🔎 Victron Energy provides 5 Years Limited Warranty for their MultiPlus PMP243021102 Inverter/Chargers.

☁️ How heavy is MultiPlus PMP243021102 Inverter/Charger?

🔎 Victron Energy MultiPlus PMP243021102 Inverter/Charger is 40 lbs.

☁️ What are the dimensions for MultiPlus PMP243021102 Inverter/Charger?

🔎 MultiPlus PMP243021102 Inverter/Chargers’ dimensions are (H x W x D) 14.3″ x 10.2″ x 8.6″ inches.

☁️ How many units of MultiPlus PMP243021102 Inverter/Chargers can operate in parallel?

🔎 Up to six MultiPlus PMP243021102 Inverter/Chargers can operate in parallel to achieve higher power output.

How to Buy: Victron Energy MultiPlus PMP243021102 Inverter/Charger

If you’re ready to purchase MultiPlus PMP243021102 Inverter/Charger, all you need to do is create a free account with us and allow us to reach out to you within 24 – 48 business hours. Once we approved your account, you can begin taking advantage of wholesale pricing and next business day shipping options. Click the button below to create an account with Zonna Energy.

Filters Sort
Reset Apply