The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges battery banks.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulfated or otherwise damaged.
The MPPT VE.Can SmartSolar charger connects to a PV array of 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank and capable of up to 100 amps of charge.
The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium, and others.
The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.
The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy-chained” to each other with a single RJ45 cable between the individual units.
Did you know you can change the default name in both VictronConnect and VRM? In this did you know video, Jono shows you how.
For technical questions see our support page: https://www.victronenergy.com/support or contact your Victron dealer, distributor, or installer.
You can also have a look at our Victron Community page to see if your question has already been answered there. Or join in the conversation to help others: https://community.victronenergy.com
In this Did You Know, Marianka from Victron Energy explains how to create a battery profile for non-Victron batteries.
For technical questions see our support page: https://www.victronenergy.com/support or contact your Victron dealer, distributor, or installer.
If you have an MPPT or a Victron MultiPlus, you can set it so that when your batteries are full, a load is triggered to make use of excess solar. Johannes goes into more detail in this Did You Know
For technical questions see our support page: https://www.victronenergy.com/support or contact your Victron dealer, distributor, or installer.
You can find a more detailed explanation here: https://www.youtube.com/watch?v=uTMVmW7GTus
For technical questions see our support page: https://www.victronenergy.com/support or contact your Victron dealer, distributor, or installer.
☁️ Does SmartSolar 250/100-TR MPPT VE.Can have output short circuit protection?
🔎 Yes. SmartSolar 250/100-TR MPPT VE.Can has output short circuit protection as well as PV reverse polarity protection and overtemperature protection.
☁️ Is it possible to create user-defined battery presents with SmartSolar 250/100-TR MPPT VE.Can charge controllers?
🔎 Yes, it is possible to also create user-defined battery presets. The chapter Customize battery charge algorithm [19] explains how to do this. These user-defined presets are stored in the VictronConnect App library. This is helpful in case multiple solar chargers need to be configured, eliminating the need to define the entire charge algorithm each time a new solar charger is configured.
☁️ How many years of warranty does Victron Energy provide for the SmartSolar 250/100-TR MPPT VE.Can charge controllers?
🔎 SmartSolar 250/100-TR MPPT VE.Can – SCC125110412 come with 5 years of warranty.
If you are ready to buy an SCC125110412 maximum power point tracking charge controller SmartSolar 250/100-TR MPPT VE.Can (SCC125110412), simply register for a free account with us – your off-grid Victron Energy Charge Controller supplier; Zonna Energy – and wait for us to contact you within 24 – 48 business hours to authorize your dealer account. After you’ve registered, you’ll be able to take advantage of wholesale rates and same-day shipping choices. (Some items may qualify for next-day delivery.) Click the link below and fill out the form to establish an account. We would gladly help you with your Victron Energy – 250/100-TR MPPT VE.Can SmartSolar Charge Controller – SCC125110412 purchase.
Schneider Electric Conext MPPT 60 Charge Controller (SKU: 865-1030-1) is a PV solar charge controller that tracks the maximum power point of a PV array to deliver the maximum available current for charging batteries. It has an easy installation with its configurable auxiliary output, LCD screen with faceplate buttons for configuration and system monitoring, and […]
MidNite Solar Classic 250 Charge Controller, 61A, 250V
Midnite Solar Classic 200 Charge Controller, 79A, 200V
Zonna Energy is a full-service supplier for solar installers across North America and the Caribbean. Why should you source your solar systems from us? Consider the following:
When it comes to keeping your margins wide while increasing your customer satisfaction, your solar energy equipment supplier is a significant factor. Don’t get left behind your competition, choose Zonna to supply your equipment. Our low costs, quick shipping, and expert advice will keep you and your customers smiling from one job to the next. Feel free to call us any time, we would love to chat and discuss your off-grid goals.
CEO – Matt Smucker
