PT-100 MPPT Charge Controller

$0.00 - 0 items Categories

Categories

<< Store Home Page...

PT-100 MPPT Charge Controller

  • Maximum Power Point Tracking Battery.
  • 100 Amps Output Current.
  • 12V, 24V, or 48V Battery Voltage.
  • 200 VDC Input.
  • 5 Years of Warranty.

Wholesale Only Become A Dealer

The PT-100 is a Maximum Power Point Tracker (MPPT) charge controller designed to harvest the maximum available energy from the PV array and deliver it to the batteries. The PT-100’s MPPT algorithm finds the maximum power point of the array and operates at this point while regulating the output current and battery voltage to fully charge the battery.

Features: PT-100 Charge Controller

  • Maximum Power Point Tracking technology for increased PV power output efficiency.
  • Multi-Stage Charging maximizes system performance and improves battery life.
  • Optimal Battery Charging maximizes system performance and improves battery life.
  • Compatible with 12, 24, or 48V battery systems with automatic detection of system voltage.
  • Integrated PV Ground- Fault Detection and Interruption/ Indication, with pre-fault leakage/ diagnostic metering.
  • Over-temperature protection, power derating when temperature is high, PV short circuit and high PV input shutdown, output overcurrent protection and night-time back-feed (reverse current) protection.
  • A single controller supports a large PV array up to 6600W.
  • The PT-100 provides higher than 99% conversion efficiency and uses less than two watts of power in nighttime mode.
  • Multiple LED indicators and large digital LED screen on front panel for easy-to-read system information.
  • An integrated PV Arc- Fault Circuit Interrupter detects, indicates, and extinguishes series arcs. The AFCI is designed to meet the new National Electric Code (NEC) Article 690.11 requirements.
  • Run all of the wiring to the unique, remain-in- place wiring box with ease prior to installing the full PT-100 unit.
  • The PT-100’s software can be updated on site.
  • The PT-100 is designed to work with a Magnum Panel (MP) or Mini-Magnum Panel (MMP). It provides room and access to PV and battery disconnect breakers.

Documents: PT-100 Charge Controller

Videos: PT-100 Charge Controller

Setup a PT-100 Charge Controller with the ME-ARC Remote

This video is designed to help guide you through the screens of the ME-ARC revision 4.0 in order to setup your PT-100. Other revisions may show slightly different screens, but this video should get you through the basics of programming. Please note that this video is not meant to go over every possible scenario, but rather give you an idea of how to program your system for your particular setup. By the end of this video, you should be able to link parameters to your PT-100, create custom parameters, edit max charge rate and time, and more. Please refer to your owner’s manual for more in-depth information.

Understand the ME-ARC Remote Meter Screens for the PT-100 Charge Controller

Understand the ME-ARC Remote Meter Screens for the PT-100 Charge Controller

This video is designed to help guide you through the meter screens of the ME-ARC revision 4.0 in order to see what your PT-100s are doing. Other revisions may show slightly different screens, but this video should get you through the menus. By the end of this video you should be able to check power & relay status, voltage, amperage, output, and data history. Please refer to your owner’s manual for more in-depth information.

Setup the PT-100 Charge Controller with the ME-ARTR Router

Setup the PT-100 Charge Controller with the ME-ARTR Router

This video is designed to help guide you through the screens of the ME-ARTR revision 4.0 in order to setup your PT-100 Charge Controller. This video is not meant to go over every possible scenario, but rather give you an idea of how to program your system for your particular setup. Please refer to your owner’s manual for more in-depth information.

ME-ARTR and the Meter Screens for the PT-100 Charge Controller

ME-ARTR and the Meter Screens for the PT-100 Charge Controller

This video is designed to help guide you through the meter screens of the ME-ARTR revision 4.0 in order to see what your PT-100 Charge Controllers are doing. Other revisions may show slightly different screens, but this video should get you through the menus. Please refer to your owner’s manual for more in-depth information.

How to Install the PT-100 Charge Controller to the MP Panel System with Charge Controller Bracket

How to Install the PT-100 Charge Controller to the MP Panel System with Charge Controller Bracket

This video is designed to help guide you through installing the PT-100 MPPT charge controller on a Magnum Panel using the charge controller bracket (included with MMP, MPSL, MPSH, and MPDH Panel Systems).

The tools you will need are:
A T15 Torx screwdriver
A T20 Torx screwdriver
A flathead screwdriver
A hammer
A 1” close nipple and up to three locknuts

Please refer to the PT-100 owner’s manual for more in-depth information:

Magnum Dimensions PT-100 Charge Controller - User’s Manual

FAQs: PT-100 Charge Controller

☁️ What kind of technology does the PT-100 charge controller from Magnum dimensions uses?

🔎 The PT-100 is a maximum power point tracking charge controller.

☁️ What are the weight and dimensions of the PT-100 charge controller?

🔎 The PT-100 charge controller is 13.6 lbs. and 8.5″ x 15.5″ x 4.0″ (21.6 cm x 39.4 cm x 10.2 cm).

☁️ How many years of warranty does the PT-100 charge controller come with?

🔎 Magnum Dimensions provides 5 years of warranty for the PT-100 charge controller.

☁️ Is the PT-100 charge controller ETL listed?

🔎 Yes, the PT-100 charge controller has been listed in ETL to UL/cUL 1741, CSA C22.2 #107.1-01, CE.

How to Buy: PT-100 Charge Controller

You need to know how to buy Magnum Energy – PT-100 Charge Controller if you’re ready to do so. Please create an account with us first to become a dealer. We’ll assess and approve your request for an account once you’ve made one with us. After that, we’ll contact you to authenticate your new account and add you as a verified client with a dealer account, giving you access to wholesale rates and same-day shipment (it might be the next business day on some of the products).