IOTA Engineering – DLS 90A Power Converter & Battery Charger – DLS-12V-90A/120V

DLS-12V-90A/120V: The IOTA 120VAC to 12VDC DLS 90 Series Converter/Charger design provides clean, steady output for efficient battery charging and confident operation of your DC equipment. The durable engineering of the DLS Series combines reliable AC/DC performance with whisper-quiet operation and lower operating temperature.

In order to operate DC loads and charge 12V batteries, the DLS 90A Power Converter/Battery Charger from IOTA converts nominal 108–132 AC voltage to 13.4 DC voltage.

The unit’s tightly controlled regulation enables the user to run a nominal 12VDC load up to 90 amps using it as a power supply.

When the battery capacity is sufficiently low, the device functions as a battery charger to maintain the battery and deliver its full rated current. To reduce undue stress on the battery from cell heating, the voltage is set to deliver its maximum current for the required amount of time. The battery can live as long as possible thanks to this. Over time, as the battery gets closer to being fully charged, the DLS will automatically reduce the current, giving the battery a float-charge to stop the cells from being discharged by themselves.

Features: DLS 90A Power Converter & Battery Charger – DLS-12V-90A/120V

• Dual-State Charging: IOTA’s Dual-State Charging technology enables the device to work as a constant voltage or constant current charger and automatically selects the best charging technique for your battery’s requirements, resulting in safer, quicker, and more effective charging.
• Line / Load Control: The DLS’s precise line/load control enables the clean conversion of AC voltage into consistent and dependable DC power for your battery or load. Due to the DLS Series’ ability to stop variable DC output, onboard and delicate equipment can be operated with confidence for the longest possible life without fear of damage or equipment shutdown from unanticipated overloads.
• Switch-Mode Technology: The IOTA DLS Series uses cutting-edge switch mode technology to significantly reduce high dissipation states and minimize wasted power. The switch-mode design allows for a small chassis with lower operating temperatures and also offers dependable, efficient performance.
• Compatible With: Select NiFe and Lithium Battery Types, Deep-Cycle, VRLA, Gel, AGM, and Flooded Lead-Acid Battery Types
• Low transient AC line voltage protection features, as well as current limit and thermal overload protection, are built-in.
• Lower operating temperature for safer operation in constrained compartment spaces and longer component life.
• Proportional Fan Control provides ‘whisper-quiet’ operation, utilizing the fan only when needed and at minimal speeds, eliminating sudden and obtrusive start-up noise.
• In the event that the battery is connected improperly, the external reverse polarity automotive bladetype will protect the device.
• Dual Voltage Jacks enable simple installation of the IQ4 Smart Charge Controller and manual selection of Normal or Absorption Phase charging.
• Can be used to automatically charge batteries in multiple stages to avoid stratification and sulfation using the optional IQ Charge Controller.
• UL Listed for use in United States and Canada.

Specifications: DLS 90A Power Converter & Battery Charger – DLS-12V-90A/120V

• Product Type: Charger/Power Converter
• Input Voltage: 108-132 VAC
• Output Voltage: 13.4 VDC
• Voltage Rating: 120
• Frequency: 50/60HZ
• Load Voltage Rating: 12VDC
• Amperage: 90
• Max. Operating Temperature: 40
• Min. Operating Temperature: 0
• Storage Temperature: -20° to 80° C
• Input Voltage Range: 108 – 132 VAC
• Input Voltage Frequency: 47-63
• Short Circuit Protection: Yes
• Thermal Protection: Yes
• Regulatory Listing: C-UL-US
• Compliance Listing: ROHS
• Series: DLS
• Dimensions (LxWxH): 3.4 x 6.5 x 13.1
• Weight: 7.8 lb.
• Warranty: IOTA’s Two-Year Warranty.

Downloads: DLS 90A Power Converter & Battery Charger – DLS-12V-90A/120V

• Specification Sheet
• Installation Instructions
• DLS 90A Series Operation Diagram
• DLS 90A Troubleshooting Steps
• IOTA DLS Series Product Guide

Videos: DLS 90A Power Converter & Battery Charger – DLS-12V-90A/120V

FAQs: DLS 90A Power Converter & Battery Charger – DLS-12V-90A/120V

🔎 How many years of warranty does IOTA Engineering provide for the DLS-12V-90A/120V power converter & battery charger?

💬 IOTA Engineering provides 2 years of limited warranty for this power converter & battery charger.

🔎 What are the dimensions of this power converter & battery charger?

💬 This unit’s dimensions are 3.4 x 6.5 x 13.1 inches.

🔎 How heavy is this power converter & battery charger?

💬 This power converter & battery charger from IOTA Engineering weighs 7.8 lb.

🔎 How can I purchase this power converter & battery charger from an off-grid solar energy equipment supplier?

💬 Glad you’ve asked! You can follow the section below to partner with Zonna – your off-grid solar wholesale distributor – and take advantage of wholesale pricing and next-day shipping opportunities!

How to Buy: DLS 90A Power Converter & Battery Charger – DLS-12V-90A/120V