IOTA Engineering – DLS 27V 40A Power Converter & Battery Charger – DLS-27V-40A/120V

DLS-27V-40A/120V: In order to operate DC loads and charge 24V batteries, the DLS 27V 40A Power Converter/Battery Charger from IOTA converts nominal 108-132 AC voltage to 27.2 DC voltage.

The IOTA 120VAC to 24VDC DLS 27 40 Series Converter/Charger provides clean, steady output for efficient battery charging and confident operation of your DC equipment. The compact, durable engineering of the DLS Series combines reliable AC/DC performance with whisper-quiet operation and lower operating temperature.

The unit can operate a nominal 24VDC load up to 40 amps as a power supply thanks to its carefully monitored regulation.

In its capacity as a battery charger, the device will keep the battery charged and deliver its full rated current when the battery capacity is sufficiently low. In order to lessen the battery’s undue stress from cell heating, the voltage is set to deliver its maximum current for the required amount of time. This promotes the battery’s ability to last as long as possible. The DLS will gradually reduce the current as the battery gets closer to full capacity, giving it a float-charge to stop the cells in the battery from discharging on their own.

Features: DLS 27V 40A Power Converter & Battery Charger – DLS-27V-40A/120V

• Dual-State Charging: IOTA’s Dual-State Charging technology gives the device the ability to function as a constant voltage or constant current charger and automatically chooses the best charging method for your battery’s needs, leading to safer, quicker, and more efficient charging.
• Line / Load Control: The clean conversion of AC voltage into steady, dependable DC power for your battery or load is made possible by the DLS’s precise line/load control. Onboard and delicate equipment can be operated with confidence for the longest life possible without worrying about damage or equipment shutdown from unexpected overloads thanks to the DLS Series’ ability to stop variable DC output.
• Switch-Mode Technology: Modern switch mode technology is used by the IOTA DLS Series to significantly reduce high dissipation states and minimize wasted power. The switch-mode design offers dependable, effective performance and enables a small chassis with lower operating temperatures.
• Compatible With: Select NiFe and Lithium Battery Types, Deep-Cycle, VRLA, Gel, AGM, and Flooded Lead-Acid Battery Types
• Current limit, thermal overload, and low transient AC line voltage protection features are all built-in.
• Lower operating temperature for longer component life and safer operation in small compartments.
• By using the fan only when necessary and at low speeds, proportional fan control enables “whisper-quiet” operation and gets rid of abrupt and intrusive startup noise.
• The external reverse polarity automotive bladetype will safeguard the gadget if the battery is connected incorrectly.
• Simple installation of the IQ4 Smart Charge Controller and manual selection of Normal or Absorption Phase charging are made possible by dual voltage jacks.
• Can be used with the optional IQ Charge Controller to automatically charge batteries in various stages to prevent stratification and sulfation.
• UL Listed for use in United States and Canada.

Specifications: DLS 27V 40A Power Converter & Battery Charger – DLS-27V-40A/120V

• Product Type: Charger/Power Converter
• Input Voltage: 108-132 VAC
• Output Voltage: 27.2 VDC
• Voltage Rating: 120
• Frequency: 50/60HZ
• Load Voltage Rating: 24VDC
• Amperage: 40
• Max. Operating Temperature: 40
• Min. Operating Temperature: 0
• Storage Temperature: -20° to 80° C
• Input Voltage Range: 108 – 132 VAC
• Input Voltage Frequency: 47-63
• Short Circuit Protection: Yes
• Thermal Protection: Yes
• Regulatory Listing: C-UL-US
• Compliance Listing: ROHS
• Series: DLS
• Dimensions (LxWxH): 3.4 x 6.5 x 13.1
• Weight: 7.8 lb.
• Warranty: IOTA’s Two-Year Warranty.

Downloads: DLS 27V 40A Power Converter & Battery Charger – DLS-27V-40A/120V

• Specification Sheet
• Installation Instructions
• DLS 90A Series Operation Diagram
• DLS 90A Troubleshooting Steps
• IOTA DLS Series Product Guide

Videos: DLS 27V 40A Power Converter & Battery Charger – DLS-27V-40A/120V

FAQs: DLS 27V 40A Power Converter & Battery Charger – DLS-27V-40A/120V

🔎 How many years of warranty does IOTA Engineering provide for the DLS-12V-90A/120V power converter & battery charger?

💬 IOTA Engineering provides 2 years of limited warranty for this power converter & battery charger.

🔎 What are the dimensions of this power converter & battery charger?

💬 This unit’s dimensions are 3.4 x 6.5 x 13.1 inches.

🔎 How heavy is this power converter & battery charger?

💬 This power converter & battery charger from IOTA Engineering weighs 7.8 lb.

🔎 How can I purchase this power converter & battery charger from an off-grid solar energy equipment distributor?

💬 Glad you’ve asked! You can follow the section below to partner with Zonna – your solar energy equipment supplier – and take advantage of wholesale pricing and next-day shipping opportunities!

How to Buy: DLS 27V 40A Power Converter & Battery Charger – DLS-27V-40A/120V