IOTA Engineering – DLS-27V-25A, Power Converter & Battery Charger – DLS/M-27V-25A/120V

DLS/M-27V-25A/120V: IOTA’s DLS-27V-25A Power Converter/Battery Charger converts nominal 108-132 AC voltage to 27.2 DC voltage for both DC load operation and 24V battery charging.

The DLS Series from IOTA has a proven track record of outstanding performance in battery charging and AC/DC power conversion. Designed for efficient and clean DC output in electrical systems across a wide range of industries.

The unit’s tightly controlled regulation allows the user to operate a nominal 24VDC load up to 25 amps as a power supply.

As a battery charger, the unit will keep the battery charged by delivering its full rated current when the battery capacity is low enough. The voltage is set to deliver its maximum current for the required amount of time in order to minimize undue stress on the battery caused by cell heating. This contributes to the battery’s longest possible life. As the battery approaches full capacity, the DLS will automatically reduce the current, providing a float charge to the battery to prevent cell self-discharge.

Features: DLS-27V-25A, Power Converter & Battery Charger – DLS/M-27V-25A/120V

• IOTA’s Dual-State Charging technology allows the device to function as a constant voltage or constant current charger and automatically selects the best charging method for the needs of your battery, resulting in safer, faster, and more efficient charging.
• The DLS’s tight line/load control allows for clean conversion of AC voltage into dependable, steady DC power for your battery or load. The DLS Series eliminates erratic DC output, allowing for the safe operation of onboard and sensitive equipment for the longest possible life. Unpredictable overloads are prevented from damaging or shutting down equipment.
• The IOTA DLS Series employs cutting-edge switch mode technology to reduce high dissipation states and waste power. The switch-mode design enables a small chassis with a lower operating temperature while also providing consistent, efficient performance.
• Clean and consistent DC output keeps your loads running as intended while protecting systems from damage caused by errant DC voltage.
• Built-in safety features protect the device from erratic line voltage caused by generator or shore power supplies.
• Reverse Polarity Protection uses readily available, replaceable fuse types to protect against damage caused by improper battery connection.
• Control the fan proportionally for whisper-quiet operation.
• Compatible with the IOTA IQ4 Smart Charger for four-stage charging automatically.
• Optional charging jack for normal and high-stage battery charging applications.
• Covered by IOTA with a full two-year warranty.

Specifications: DLS-27V-25A, Power Converter & Battery Charger – DLS/M-27V-25A/120V

• Product Type: Charger/Power Converter
• Input Voltage: 108-132 VAC
• Output Voltage: 27.2 VDC
• Voltage Rating: 120
• Frequency: 50/60HZ
• Load Voltage Rating: 12VDC
• Amperage: 25
• Max. Operating Temperature: 40
• Min. Operating Temperature: 0
• Storage Temperature: -20° to 80° C
• Input Voltage Range: 108 – 132 VAC
• Input Voltage Frequency: 47-63
• Short Circuit Protection: Yes
• Thermal Protection: Yes
• Regulatory Listing: C-UL-US
• Compliance Listing: ROHS
• Series: DLS
• Dimensions (LxWxH): 6.2 x 9.6 x 3.4
• Weight: 4.5 lb.
• Warranty: IOTA’s Two-Year Warranty.

Downloads: DLS-27V-25A, Power Converter & Battery Charger – DLS/M-27V-25A/120V

• Specification Sheet
• Installation Instructions
• DLS-27V-25A Series Operation Diagram
• DLS-27V-25A Troubleshooting Steps
• IOTA DLS Series Product Guide

Videos: DLS-27V-25A, Power Converter & Battery Charger – DLS/M-27V-25A/120V

FAQs: DLS-27V-25A, Power Converter & Battery Charger – DLS/M-27V-25A/120V

🔎 How many years of warranty does IOTA Engineering provide for the DLS/M-27V-25A/120V power converter & battery charger?

💬 IOTA Engineering provides 2 years of limited warranty for this power converter & battery charger.

🔎 What are the dimensions of this power converter & battery charger?

💬 This unit’s dimensions are 6.2 x 9.6 x 3.4 inches.

🔎 How heavy is this power converter & battery charger?

💬 This power converter & battery charger from IOTA Engineering weighs 5 lb.

🔎 How can I purchase this power converter & battery charger from an off-grid solar equipment distributor?

💬 Glad you’ve asked! You can follow the section below to partner with Zonna – your off-grid solar wholesale distributor – and take advantage of wholesale pricing and next-day shipping opportunities!

How to Buy: DLS-27V-25A, Power Converter & Battery Charger – DLS/M-27V-25A/120V