Classic 150: The Midnite Solar Classic 150 MPPT charge controller lines will significantly expand the versatility, features, and range now available on MPPT controllers. The MidNite Classic 150 charge controller is unique in that it may be utilized with a wide range of DC input sources. The Classic 150 is intended to regulate direct current (DC) input from PV, approved hydro, and wind turbines. The Classic 150, 200, and 250 are designed to work with 12 volts, 24 volts, 36 volts, 48 volts, 60 volts, and 72-volts battery banks.
Why would you need another charge controller when the Classic 150 can reach 96 amps, the Classic 200 can reach 79 amps, and the Classic 250 can reach 63 amps?
MidNite Solar has increased its factory floor area for the Classic line of charge controllers, making the Classic the only true “Made in America” charge controller. The only MPPT charge controllers with built-in Arc Fault Detection are the Classic standard variants, making them the safest controllers available.
Features: MidNite Solar Classic 150 Charge Controller
- ETL listed to UL1741 and CSA.
- Type 1 environmental rating.
- Terminals are rated for 75 C.
- Solar, wind, and hydro MPPT modes.
- Listed by ETL for US & Canada.
- CE Certified Listed.
- FCC Class B Listed.
- Made in the USA.
- 5 years of warranty.
- NOTE: The Classic does not support Hughes.net satellite-based communications.
Documents: MidNite Solar CLASSIC 150 Charge Controller
FAQs: MidNite Solar CLASSIC 150 Charge Controller
☁️ How many 395w solar panels would I need to charge a bank of 10 x 100Ah 12v AGM batteries at 50% capacity in 5 hours with a MidNite Solar Classic 150 Charge Controller?
🔎 First, we must determine the battery capacity. So, we multiply 12 Volts by 100 Amps to get 1,200 Watt-hours per battery. Ten batteries equal 12,000 Watt-hours (12 Kilowatt-hours). 50% discharge equals 6 kilowatt-hours. 4 panels are required to charge this with 5 hours of sunlight. I’m not sure how much direct sunshine you’d receive from fixed panels where you live so that it could be six panels.
☁️ Can MidNite Solar Classic 150 Charge Controller be operated with a 60-volt battery?
🔎 Visit MidNite Solar’s Classic string sizing tool for sizing purposes.
☁️ Does MidNite Solar Classic 150 Charge Controller work with Lithium ION batteries?
🔎 Yes. Charging time and voltage are both fully customizable. It is nevertheless strongly advised that the battery bank have its own BMS.
☁️ What’s the difference between the regular classic and Lite?
🔎 The “Lite” model saves a few dollars, but it lacks a Digital Display and Arc Fault Protection. In addition, instead of the graphical display shown on the original Classic controller, the Lite version of this controller has an LED indicator panel with Dip switches. Therefore, I believe that the full-function unit is an excellent buy.
☁️ Is Classic 150 Charge Controller has enough to power a 1000w/24v panel and a 900w wind turbine in an off-grid setup?
🔎 The Classic 150 MPPT Charge Controller is a high-quality unit that will maximize the power of your system. It does not, however, have two inputs, so use one for each. If you want to buy one right now, install it on your solar panels and use the regular controller that came with your wind turbine for the wind end of the system.
How to Buy: MidNite Solar Classic 150 Charge Controller
If you’re ready to buy, all you need to know is how to buy a MidNite Solar Classic 150 Charge Controller. Create an account with us to become a dealer. We will examine and approve your account creation request once you have created an account with us. Then, we’ll contact you to confirm your new account, and you’ll become a verified client with a dealer account, allowing you to benefit from wholesale rates and same-day shipment (it might be the next business day on some of the products).
Become A Dealer